013.25.560 Internal Teeth UWE Slewing Bearing/slewing Ring
| da: | 101.6 mm |
| Da: | 259.999 mm |
| Ca: | 95.809 mm |
| A1: | 158.75 mm |
| A2: | 215.9 mm |
| S: | 4.763 mm |
| ba: | 67.469 mm |
| H: | 320.675 mm |
| PDF |
|
Product Details
| da | 101.6 mm |
| Da | 259.999 mm |
| Ca | 95.809 mm |
| A1 | 158.75 mm |
| A2 | 215.9 mm |
| S | 4.763 mm |
| ba | 67.469 mm |
| H | 320.675 mm |
| H1 | 160.325 mm |
| H2 | 63.5 mm |
| J min. | 431.8 mm |
| J max. | 463.55 mm |
| J1 | 95.25 mm |
| L | 539.75 mm |
| N1 | 28.575 mm |
| R1 | 95.25 mm |
| R2 | 39.688 mm |
| RG | 3/4 NPT |
| PG | 1/4 NPT |
| h | 60.325 mm |
| Housing | SAF 624 |
| Stabilizing ring | SR-0-24 |
| Labyrinth ring | 2 x LOR 657 |
| PosiTrac Plus contact element | 2 x B10724-113 |
| End plug (suffix Y) | EPR 14 |
| Max. speed for PosiTrac Plus seal | 1350 r/min |
| P60° | 230 kN |
| P90° | 138 kN |
| P120° | 87.2 kN |
| P150° | 80.1 kN |
| P180° | 96.1 kN |
| Pa | 30.9 kN |
| Mass pillow block | 93.5 kg |
| Cap bolt | 4 x 3/4-10 UNC |
| Cap bolt recommended tightening torque | 203.4 N·m |
| Cap bolt, SAE grade | 5 |
| Eye bolt | 2 x 3/8-16 UNC |
| Appropriate attachment bolt size G | 1 in |
| Initial grease fill | 623.7 g |
