6392/2910G UWE Slewing Bearing/slewing Ring
| da: |
73.025 mm |
| Da: |
150 mm |
| Ca: |
45.796 mm |
| A1: |
88.9 mm |
| A2: |
127 mm |
| S: |
4.763 mm |
| ba: |
35.719 mm |
| H: |
187.325 mm |
| PDF |
|
Product Details
| da |
73.025 mm |
| Da |
150 mm |
| Ca |
45.796 mm |
| A1 |
88.9 mm |
| A2 |
127 mm |
| S |
4.763 mm |
| ba |
35.719 mm |
| H |
187.325 mm |
| H1 |
95.25 mm |
| H2 |
38.1 mm |
| J min. |
250.825 mm |
| J max. |
279.4 mm |
| J1 |
53.975 mm |
| L |
330.2 mm |
| N1 |
19.05 mm |
| R1 |
53.975 mm |
| R2 |
22.225 mm |
| RG |
3/8 NPT |
| PG |
1/8 NPT |
| h |
34.925 mm |
| Housing |
FSAFS 517 |
| Stabilizing ring |
SR-17-14 |
| Labyrinth ring |
2 x LOR 52 |
| End plug (suffix Y) |
EPR 9 |
| Bearing limiting speed |
5600 r/min |
| P60° |
83.2 kN |
| P90° |
49.8 kN |
| P120° |
31.6 kN |
| P150° |
28.5 kN |
| P180° |
33.8 kN |
| Pa |
9.25 kN |
| Mass pillow block |
24.5 kg |
| Cap bolt |
2 x 5/8-11 UNC |
| Cap bolt recommended tightening torque |
298.3 N·m |
| Cap bolt, SAE grade |
8 |
| Appropriate attachment bolt size G |
0.625 in |
| Initial grease fill |
110.56 g |